Telecentric Measurement System HM Pomeas

Pomeas
Telecentrični merilni sistem Pomeas

Presentation

The HM series POMEAS telecentric measuring system supports a wide range of measurements with high versatility and built-in intelligent dimensional control that is fast and accurate.

  • Accurate measurement, even if the subject is off-center

The system features a high depth of field telecentric system design that ensures measurement accuracy for controlled pieces within the depth of field, even when arbitrarily offset.

  • Ensuring accuracy within the entire field of view

The near-distortion-free design combined with the perfect surface treatment of the field of view ensures accurate measurements throughout the field of view.

  • Easy setup with many program tools avelable

The system is equipped with various control tools and is able to handle a wide range of different software needs of users. There are more than one type of measuring tool available in various combinations. In addition to simple dimensional measurements, a wide range of tools support in-line inspections, including geometric tolerance measurements, standard contour comparisons for easy identification of different grades, and defect distance measurements for easy visual inspection

  • Simultaneous inspection of dimensions and damage

The system extracts the contour of the edge of the object and compares it with the other measured pieces, marking the differences as errors. This feature can be used on all edges whether straight, rounded or wavy.

  • Function for comparing profiles of complex shapes:

The function not only measures common dimensions such as slope or hole area, but also estimates the size of the area at different positions relative to a standard image. This enables stable detection of complex shapes such as resistors, which are usually difficult to configure with conventional tools.

  • Serial copy function

When setting up multiple measured pieces at the same time, the serial copy function allows you to serially copy and arrange the tools in any number/direction/interval, making the setup easier and faster to complete.

  • Connecting two HM telecentric measurement systems
When using two measuring heads, a wide range of tools is also available that enable measurements across both measuring heads. A combination of tools determined by the individual measuring head is also possible. Various types of measurements can be performed, for example measuring the distance between lines and measuring the diameter of a combined circle with two measuring heads.
Telecentric measument system models

The software interface is simple to use and easy to understand

Pomeas HM series setup tools
Programming HM series examples

Telecentric systems HM series examples of use

Pomeas HM serije primeri aplikacij