Vision Measurement Systems IMAGE 3 Pomeas

Automatic recognition reduces setup time

Automatic identification of the position and direction of the target, with the push of a measuring button, greatly saves man-hours and improves efficiency.

Simultaneous measurement of several Products reduces costs

The measured objects can be placed anywhere, multiple products can be measured at the same time, greatly saving measurement time and reducing labour costs and increasing efficiency!

No measurement deviation due to camera focus adjustment

IMAGE3 je opremljen z optično lečo, posebej zasnovano za veliko globinsko ostrino, samodejno izostri tarče, ki jih ni mogoče izostriti naenkrat zaradi neravnih površin, na različnih položajih merjenja, s čimer odpravi napake pri ostrenju, ki jih povzročajo različni operaterji.

IMAGE3 is equipped with an optical lens specially designed for large depth of field. It automatically focuses  targets that cannot be focused at once due to uneven surfaces at different metering positions, eliminating focus errors caused by different operators.

No edge detection bias

If the measured edge contains errors, they can be eliminated from the control process or considered as irregularities based on automatic recognition. Easily make dimensional measurements “faster”, “more accurate” and “easier

No deviation due to focus setting

With an optical lens with a large depth of field, all dimensions within the range can be measured. In addition, the auto focus function allows you to measure the product at different heights without affecting the results. The measurement results are more accurate.

Automatic adjustment to optimal illumination conditions

The combination of several variable adjustable light units through the built-in brightness sensor sets different ambient light, adjusts the height, brightness and angle of the light source of the system to achieve the best visual effect and precise physical edge of the object.

Presentation

The Pomeas IMAGE 3 series image dimensioning system is fast, accurate, consistent, affordable and easy to use. It can scan over 100 dimensions in one second, with measurements and reports available at the touch of a button. It allows you to take measurements of several pieces at once in seconds.

The automatic optical inspection system combines the advantages of a conventional caliper , optical comparator (Profile projector), confocal sensor and simple graphic programming.

High-resolution imaging is supported by dual 20-megapixel cameras with low-distortion lenses (Telecentric lenses) that provide a large and small field of view at the same time and are equipped with the latest AI edge detection algorithm. The multi-level illumination system enables, together with light sensors, automatic adjustment of the illumination to achieve the best visual effect for the measurement area. Optional models also include a confocal sensor for precise height measurement and a touch sensor for multi-sensor measurement systems.

Automatic, fast and accurate optical measuring systems are suitable for measuring distance, radius, diameter, radian angle and other dimensions. They are suitable for quality control and measurements in various industries: electronics, mechanical processing, turning, plastic processing and the automotive industry. We can measure stamped and cast parts, injection molded parts, machined parts or laser cut parts. The Vision measuring system allows you to take measurements of several pieces at once in seconds. Also suitable for large and complex products. It also enables connectivity with other devices.

IMAGE 3 devices can be programmed manually, but you can also upload a CAD image to the system and take measurements from the file.

Measurement results are automatically saved and can be easily found  by measurement date, product name, product material number, etc. Data traceability is simple and straightforward.

In addition to outputting data to excel, the system can automatically generate a measurement report with a simple click of a button.